FSW17H – Hydraulic Flange Spreading Wedge Single Tool and Pump Kit

The FSW17H is a Hydraulic flange spreading tool kit used to separate flange joints for maintenance, Installation, testing and decommissioning. The kit contains an FSW17 spreading wedge a hydraulic hand pump, hose and all items required to operate the tool safely, it is packaged in a robust carry case for easy transport and storage.

The FSW17H:

  • Requires a minimum flange gap of 6mm (0.24”)
  • Spreads the flanges with a parallel action ensuring a full 15mm Jaw step contact is maintained for safe and stable spreading

The FSW17 produces a maximum spreading force of 163kN (36644lbf) when the maximum pressure of 700bar (10,000PSI) is applied with the hand pump provided in the kit.

A powerful and portable Hydraulic tool, the FSW17 weighs only 7Kg (15.4lbs) and is the correct hydraulic tool for medium and small sized flange joints that require spreading.

SKU: FSW17H Category:

The FSW17 tool is design to enter the gap between flanges and force the flange open removing the requirement for traditional rigging equipment and certified anchor points.

It is highly recommended that a minimum of two FSW17 tools are used when spreading flange joints – This allows the operator to control the opening of the flange joint to maintain a parallel gap – this will ensure the tool maintains a secure grip on the flange and prevent pinching the gasket and potential flange face damage.

The FSW17 is actuated by hydraulic pressure that pushes a piston creating a linear force on the internal wedge – the internal wedge then forces the jaws of the tool apart.

Using high pressure hydraulics allows the operator to generate very high spreading forces with a hand pump (included in the FSW17H kit) – this removes the requirement for an external power source.

All RenQuip Spreading wedge tools are designed to be used in conjunction with RenQuip Flange Alignment tools.

The Tool is lightweight and portable making it ideal for use in remote locations.

If more force is required greater multiples of tools can be used or our newest hydraulic spreading wedges (VIPER – 28) can be used.

All RenQuip tools are manufactured from the highest quality materials and 100% load tested resulting in highly durable, low maintenance products.

Maximum Spreading Force

163kN (36644 lbf)

Maximum Applied Pressure

700Bar 10,000PSI

Maximum Spreading Distance (with stepped blocks)

81mm (3.19”)

Minimum Flange Gap

6mm (0.24”)

Jaw Width

66mm (2.6”)

Maximum Wedge Protrusion

38mm (1.50”)

Tool Weight

7Kg (15.4lbs)

Tool Dimensions

76mm x 155mm x 350mm (3.0” x 6.1” x 13.8”)

Kit Weight

17Kg (37.5lbs)

Kit Dimensions

580mm x 340mm x 180mm (22.8” x 13.4” x 7.1”)

Kit Contents Image
1 x FSW17 Tool
1 x PH300S Hydraulic Hand Pump
1 x Hydraulic Pressure Gauge
1 x 2M Hydraulic Hose with couplers
1 x Safety Block
2 x Stepped Blocks
1 x Instruction Manual
1 x Robust moulded carry case

Product Downloads