FSW17P – Hydraulic Flange Spreading Wedge Single Tool with Integral Pump Kit

The FSW17P is a Hydraulic flange spreading tool kit used to separate flange joints for maintenance, Installation, testing and decommissioning. The kit contains a FSW17P spreading wedge Tool, stepped blocks, safety blocks and everything needed to operate the tool safely, The integral pump removes the requirement for a hand pump and hoses making the FSW17P very compact and ideal for use in remote or tight access areas or when abseiling, it is packaged in a robust carry case for easy transport and storage.

The FSW17P:

  • Requires a minimum flange gap of 6mm (0.24”)
  • Spreads the flanges with a parallel action ensuring a full 15mm Jaw step contact is maintained for safe and stable spreading

The FSW17 produces a maximum spreading force of 163kN (36644lbf) when the maximum hydraulic pressure of 700bar (10,000PSI) is generated through the integral pump.

A powerful and portable Hydraulic tool, the FSW17P weighs only 8.5Kg (18.7lbs) and is the correct hydraulic tool for medium and small sized flange joints that require spreading.

SKU: FSW17P Category:

The FSW17P kit is a popular choice for abseilers and tight access areas because the in-built Hydraulic pump removes the need for hoses and an external pump. 

The FSW17P tool is design to enter the gap between flanges and force the flange open removing the requirement for traditional rigging equipment and certified anchor points. 

It is highly recommended that a minimum of two FSW17P tools are used when spreading flange joints – This allows the operators to control the opening of the flange joint to maintain a parallel gap – this will ensure the tool maintains a secure grip on the flange and prevent pinching the gasket and potential flange face damage. 

The FSW17P is actuated by hydraulic pressure that pushes a piston creating a linear force on the internal wedge – the internal wedge then forces the jaws of the tool apart. 

Using high pressure hydraulics allows the operator to generate very high spreading forces without the requirement for an external power source.  

All RenQuip Spreading Wedge Tools are designed to be used in conjunction with RenQuip Flange Alignment tools. 

The Tool is lightweight and portable making it ideal for use in remote locations. 

If more force is required greater multiples of tools can be used or our newest hydraulic spreading wedges (VIPER – 28) can be used.  

All RenQuip tools are manufactured from the highest quality materials and 100% load tested resulting in highly durable, low maintenance products. 

Maximum Spreading Force

163kN (36644 lbf)

Maximum Pressure from Integral Pump

700Bar 10,000PSI

Maximum Spreading Distance (with stepped blocks)

81mm (3.19”)

Minimum Flange Gap

6mm (0.24”)

Jaw Width

66mm (2.6”)

Maximum Wedge Protrusion

38mm (1.50”)

Tool Weight

8.5Kg (18.7lbs)

Tool Dimensions

76mm x 155mm x 440mm (3.0” x 6.1” x 17.3”)

Kit Weight

13Kg (28.7lbs)

Kit Dimensions

580mm x 340mm x 180mm (22.8” x 13.4” x 7.1”)

Kit Contents Image
1 x FSW17P Tool with combined hydraulic cylinder and pump unit
1 x Pump Actuating Handle
1 x Safety Block
1 x Safety Lanyard
2 x Stepped Blocks with securing screws and allen key
1 x Instruction Manual
1 x Robust moulded carry case

Product Downloads