The AT4K-1.8K is a mechanical alignment tool kit used to align bolted flanges to aid the insertion or removal of the flange bolts.The kit contains an AT4-1.8 alignment tool and all items required to operate the tool safely, it is packaged in a robust carry case for easy transport and storage.

The AT4K-1.8K can correct or prevent:

• Linear Misalignment – when the axis of the flanges are not aligned.
• Rotational Misalignment – when the axis of the flanges are aligned but the bolt holes are not aligned.

The AT4K-1.8K produces a maximum alignment force of 18kN (4046 lbf) when the maximum torque of 30Nm (22lbf*ft) is applied with the Torque Wrench provided.
A powerful and portable tool, the AT4-1.8 weighs only 8Kg (17.6lbs) and is the correct tool for medium and small sized flange joints.

The AT4K is a mechanical alignment tool kit used to align bolted flanges to aid the insertion or removal of the flange bolts.The kit contains an AT4 alignment tool and all items required to operate the tool safely, it is packaged in a robust carry case for easy transport and storage.

The AT4K can correct or prevent:

• Linear Misalignment – when the axis of the flanges are not aligned.
• Rotational Misalignment – when the axis of the flanges are aligned but the bolt holes are not aligned.

The AT4K produces a maximum alignment force of 40kN (8990 lbf) when the maximum torque of 68Nm (50lbf*ft) is applied with the Torque Wrench provided.
A powerful and portable tool, the AT4 weighs only 8Kg (17.6lbs) and is the correct tool for medium and small sized flange joints.

The AT9K is a hydraulic allignment tool kit used to align bolted flanges to aid the insertion or removal of the flange bolts.The kit contains an AT9 alignment tool, hydraulic pump and hose, and all items required to operate the tool safely. It is packaged in a robust carry case.

The AT9K can correct or prevent:

• Linear Misalignment – when the axis of the flanges are not aligned.
• Rotational Misalignment – when the axis of the flanges are aligned but the bolt holes are not aligned.

The AT9K produces a maximum alignment force of 90kN (20227 lbf) when the maximum hydraulic pressure of 700 Bar (10,000 psi) is applied by the Hydraulic hand pump.
A powerful and portable tool, the AT9 weighs only 14.5Kg (32lbs) and is the correct tool for large and medium sized flange joints.

The AT9S is a hydraulic allignment tool only used to align bolted flanges to aid the insertion or removal of the flange bolts.The kit contains an AT9 alignment tool and ratchet strap packaged in a robust carry case.This tool will require a 10,000psi rated hydraulic hand pump and hose to operate.

The AT9S can correct or prevent:

• Linear Misalignment – when the axis of the flanges are not aligned.
• Rotational Misalignment – when the axis of the flanges are aligned but the bolt holes are not aligned.

The AT9S produces a maximum alignment force of 90kN (20227 lbf) when the maximum hydraulic pressure of 700 Bar (10,000 psi) is applied by a Hydraulic hand pump.
A powerful and portable tool, the AT9 weighs only 14.5Kg (32lbs) and is the correct tool for large and medium sized flange joints.

RHINO-24P Wind Turbine Tower Flange Alignment Tool

The RHINO-24P Wind Turbine Tower Flange Alignment Tool is designed to correct bolt-hole misalignment and flange deformation during wind turbine tower construction, assembly and installation. The hydraulic system generates up to 240kN of alignment force, helping engineers safely align tower flanges and reduce installation delays.

Correcting Wind Turbine Tower Bolt-Hole Misalignment

Bolt-hole misalignment
(when the tower sections of the turbine towers are not Axially aligned).

De-ovalizing
(when the flanges are not truly concentric to the axis of the tower due to deformation or manufacturing tolerances).

The RenQuip RHINO-24P can produce a maximum reaction alignment force of 240kN when the maximum hydraulic pressure of 10,000psi (700Bar) is generated in the tool.

Engineered for the Wind Sector but capable of aligning flanges across EVERY SECTOR!

RHINO-24PLR Wind Turbine Tower Flange Alignment Tool

The RHINO-24PLR (Long Reach) Wind Turbine Tower Flange Alignment Tool is designed to correct bolt-hole misalignment and flange deformation during wind turbine tower construction, assembly and installation. The hydraulic system generates up to 238kN of alignment force, helping engineers safely align tower flanges and reduce installation delays.

Correcting Wind Turbine Tower Bolt-Hole Misalignment

Bolt-hole misalignment
(when the tower sections of the turbine towers are not Axially aligned).

De-ovalizing
(when the flanges are not truly concentric to the axis of the tower due to deformation or manufacturing tolerances).

The RenQuip RHINO-24PLR can produce a maximum reaction alignment force of 238kN when the maximum hydraulic pressure of 5,000psi (350Bar) is generated in the tool.

Engineered for the Wind Sector but capable of aligning flanges across EVERY SECTOR!